Jump to content


Photo

Non-TTL Auto Not Exposing Properly


  • Please log in to reply
2 replies to this topic

#1 justshootit

justshootit

    Deep Space Hero Member

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4282 posts
  • Gender:Male
  • Location:Southern California
  • Interests:Event photography, candids, getting photos of people at their best.

Posted 17 June 2018 - 12:18 AM

Wow, learned a valuable lesson on this.  Was just playing around with Non-TTL auto mode* with an old SB-26 on a digital camera - it was a "what am I going to do if the SB-800 doesn't work and I still need on-camera flash?" kind of experiment.  When I used this combo, I was getting shots that were about two stops overexposed, and I was a baffled as to why. 

 

That was until I looked at the front of the flash, and noticed that the Non-TTL Auto sensor looked "fuzzy."  There was a layer of dust on the sensor that was blocking about two stops of light the flash subsequently left the flash tube on longer to compensate.  I cleaned the sensor with a Q-TIP and it works perfectly now.

 

----------------------------------------

*For those of you not familiar, the SB-26 is a 1990-vintage flash that doesn't have the TTL modes that work on a digital camera.  It does TTL on film bodies, but not on digital.  On a pro camera like the D1 - D5 (I think this feature is still on the D5), the camera will pick up that there's a flash attached and set the shutter to 1/60th (depending on you settings) and it will transmit the ISO to these old flashes, but you need to set the aperture manually on the flash.  Therefore the best way to do this is with either aperture priority mode or manual mode.  On the hobbyist and semi pro cameras, the camera does not set the shutter to 1/60th and it doesn't transmit the ISO to the flash, so you need to set both the aperture and the ISO on the flash and use manual mode on the camera.  This also holds true for most of the other flashes made for film bodies.


Don
==========================================================
Digital: D610 backed up by a D1x.  Quoted from an unknown source by a fellow planeteer, "Never get rid of a working D1x." I've got to agree.

Film: N90s, F3, F100, F4s, C330s. A few lenses.

Why film photography? I like shooting with the equipment. 6x6 Velvia slides from a C330 have an appeal all their own.

Why automated 35mm/Digital cameras? Event photography is about capturing moments. It often requires quick response. Well done automaton can be your friend or your enemy. It all depends on knowing what it can and can't do. "A man's got to know his (camera's) limitations." paraphrasing Dirty Harry...

#2 fotofill

fotofill

    Galactic Master Member

  • Members
  • PipPipPipPipPipPipPipPip
  • 3398 posts
  • Gender:Male
  • Location:Nashville, TN
  • Interests:I have been blessed to have a wonderful family that permits my activities doing photojournalism.

Posted 02 September 2018 - 04:49 PM

It might set shutter at 1/250


Sports and photojournalism
http://www.fotofill.net

#3 justshootit

justshootit

    Deep Space Hero Member

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4282 posts
  • Gender:Male
  • Location:Southern California
  • Interests:Event photography, candids, getting photos of people at their best.

Posted 03 September 2018 - 11:20 PM

Hmmm. I've not seen that, but I'm guessing you have. Any idea what circumstances that happens under??
Don
==========================================================
Digital: D610 backed up by a D1x.  Quoted from an unknown source by a fellow planeteer, "Never get rid of a working D1x." I've got to agree.

Film: N90s, F3, F100, F4s, C330s. A few lenses.

Why film photography? I like shooting with the equipment. 6x6 Velvia slides from a C330 have an appeal all their own.

Why automated 35mm/Digital cameras? Event photography is about capturing moments. It often requires quick response. Well done automaton can be your friend or your enemy. It all depends on knowing what it can and can't do. "A man's got to know his (camera's) limitations." paraphrasing Dirty Harry...




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users